UST GG5500 Series, Руководство пользователя

Страница: 10 / 26

DC APPLICATION
The DC terminals may be used for charging 12V automotive-type batteries only
1.Connect the charging cables to the battery terminal.
2.Start the engine and charge the battery
An overloaded DC circuit will trip the DC circuit breaker
(push button comes out) If this happens. Check the short
circuit or counter connection and wait a few minutes
before pushing the circuit protector.
NOTE:
3.Stop the engine, then disconnect the
charging cables in the reverse order of
connection.
1.Turn off all electrical appliances.
6.STOPPING THE ENGINE
2.Turn the engine switch
to the
OFF position.
3.Disconnect the electrical
appliance. 4.Turn the fuel valve to the
OFF position.
NOTE: To stop the engine in an emergency,turn the engine switch OFF.
1 ON 2 OFF
- 7 -