USR IOT USR-TCP232-302, Руководство пользователя

Страница: 27 / 53

USR-TCP232-302 User Manual h.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
27 / 53
ucCRC 1 00 Reserve package head
ucVersion 1 00 Reserve package head
ucFlags 1 80
8th 0:DHCP
；
1:Static IP
7 th 0:Turn off factory default function
1:Turn on factory default function
usLocationURLPort 2 00 00 Not enabled, reserved protocol
usHTTPServerPort 2 50 00 HTTP service port
ucUserFlag 1 00 Not enabled, reserved protocol
ulStaticIP 4 07 00 A8 C0 Static IP
ulGatewayIP 4 C9 00 A8 C0 Gateway
ulSubnetMask 4 00 FF FF FF Subnet mask
ucModName 14
55 53 52 2D 4B 32 00 00
00 00 00 00 00 00
Module name
Protocol reserved 2 00 00 Must be 0
username 6 61 64 6D 69 6E 00 User name
password 6 61 64 6D 69 6E 00 Password
ucNetSendTime 1 00 Not enabled, reserved protocol
uiId 2 01 00 Device ID
ucIdType 1 A4
bit0(1): send ID when connecting ;
bit1(2): send ID when sending data;
bit2(4): RS485;
bit4(16): Reset;
bit5(32):Link-state;
bit6(64): index function;
bit7(128):Similar RFC2217 function,
mac_addrs 6 00 00 00 00 00 00 Device Mac address
（
only support query
）
DNSGatewayIP 4 01 00 A8 C0 DNS address
（
only support query
）
ucReserved 4 00 00 00 00 Unused
Port configuration: The parameter which is used to configure Lan port and Serial port is 63 byte .
E.g.: send ( 63 byte ) FF 52 06 00 71 77 7C 42 2F 61 64 6D 69 6E 00 61 64 6D 69 6E 00 00 C2 01 00
08 01 01 01 00 00 00 00 8C 4E 2A 20 31 39 32 2E 31 36 38 2E 30 2E 32 30 31 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 c9 00 A8C0 00 01 00 00 00 00 00 00 00 05 00 00 00 00 F0,
Check byte method : F0=52 + 06 + ... + 00 ;
From 4th to 9th is TCP232-302 MAC address,10th to 22th is user name and password.the following
is port par1 byte and check bit .
Chart 3.7-3 - Port setting command
Name Byte Example Instruction
ulBaudRate 4 00 C2 01 00 Serial port baud rate
ucDataSize 1 08 Serial port data bite (0X05/0x06/0x07/0x08)
ucParity 1 01 Serial port check bite