USR-LG220-L User Manual
Technical Support:
h.usriot.com
Jinan USR IOT Technology Limited
www.usriot.com
22
3.Configuration
3.1.Configuration procedure
Procedure:
Power off LG220->Insert SIM card and connect cable to WAN interface->Connect WiFi antenna, LoRa antenna
and 4G antenna->Power LG220->Wait about one minute and observe LED status(WAN LED and 2G/3G LED start
lighting means LG220 can access internet)->Enter Web Server, configure LG220 and restart LG220
Note
: After inserting SIM card, user needs to configure APN settings to make LG220 connect to 4G network firstly.
3.1.1.Web Server
When user needs to configure the LG220 , user can connect PC to USR-LG220 through WiFi interface, then enter
LG220 Web Server.
Default parameters of LG220 as follows:
SSID
USR-LG220 -L-XXXX
IP Address
192.168.1.1
User name
root
Password
root
WiFi Password
www.usr.cn
Figure 31 LG220 default parameters
Take default parameters as example: User can connect PC to SSID USR-LG220 -L-XXXX. Then open browser and
enter 192.168.1.1, log in with User name and Password(both are root), user can enter Web Server.
Figure 32 Web Server login web
User can change the language between Chinese/English in the top right corner.
