USR-G806-A User Manual
Technical Support:
h.usriot.com
Jinan USR IOT Technology Limited
www.usriot.com
20
Appendix: G806-A certification
ISEDC WARNING
This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Radio apparatus containing digital circuitry which can function separately from the operation of a transmitter or
an associated transmitter, shall comply with ICES-003. In such cases, the labeling requirements of the
applicable RSS apply, rather than the labelling requirements in ICES-003.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
SAR tests are conducted using standard operating positions accepted by the ISEDC with the phone
transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at
the highest certified power level, the actual SAR level of the phone while operating can be well below the
maximum value, in general, the closer you are to a wireless base station antenna, the lower the power output.
Before a new model phone is a available for sale to the public, it must be tested and certified to the ISEDC that
it does not exceed the exposure limit established by the ISEDC, Tests for each phone are performed in
positions and locations (e.g. at the ear and worn on the body)as required by the ISEDC.
For body worn operation, this model phone has been tested and meets the ISEDC RF exposure guidelines
when used with an accessory designated for this product or when used with an accessory that Contains no
metal and that positions the handset a minimum of 10 mm from the body.
Non-compliance with the above restrictions may result in violation of RF exposure guidelines.
Le présent appareil est conforme
Après examen de ce matériel aux conformité aux limites DAS et/ou aux limites
d’intensité de champ RF,les utilisateurs peuvent sur l’exposition aux radiofréquences
et la conformité and compliance d’acquérir les informations correspondantes La
distance minimale du corps à utiliser le dispositif est de 10 mm
