![USR IOT Cortex-M7 Series Скачать руководство пользователя страница 9](http://html.mh-extra.com/html/usr-iot/cortex-m7-series/cortex-m7-series_at-command-manual_1064581009.webp)
AT command set
Your TrustWorthy Industrial IoT Partner
www.pusr.com
8
Error code
Description
ERR1
Invalid command syntax
ERR2
Invalid command code
ERR3
Invalid operator
ERR4
Wrong parameter or missing arguments
ERR5
Operation not allowed
ERR6
No operation permission
2.4.
AT command set
Table 4
AT command set
No.
Instruction
Description
General commands
1
AT+E
Query/set echo status
2
AT+H
Help
3
AT+Z
Restart the module
4
AT+REBOOT
Restart the module
5
AT+CFGTF
Save the configuration as user defaults
6
AT+RELD
Restore the user default settings
7
AT+CLEAR
Restore the factory default settings
8
AT+VER
Query firmware version
9
AT+ENTM
Exit AT command mode
10
AT+MAC
Query MAC address
IP setting commands
11
AT+WANN
Query/set WAN port parameters
12
AT+DNSTYPE
Query/set DNS obtained method
13
AT+DNS
Query/set preferred DNS Server
14
AT+SDNS
Query/set alternate DNS Server
Serial port setting commands
15
AT+UARTN
Query/set serial port parameters of PortN
16
AT+UARTTLN
Query/set UART packaging mechanism of PortN
17
AT+RFCENN
Query/set RFC2217 baud rate synchronization of PortN
18
AT+UARTMN
Query/set serial port interface type of PortN(N520-H7-6)
Socket setting commands
19
AT+SOCKMN
Query/set Socket M parameters of PortN
20
AT+SOCKLKMN
Query socket M connection status of PortN
21
AT+MAXSKN
Query/set maximum sockets no. supported in TCP server
mode of PortN
22
AT+TCPSEN
Query/set whether to receive new connection after