STEP 2 (Continued):
number dialed; each P stands for a 2-second pause; the next four digits followed by the #
sign represent the pager code and the * stores the programming process for that number.
STEP 3:
Press “0” to exit PROGRAM NUMBERS.
STEP 4:
Press “1” at the PROGRAM: T-LINE prompt.
STEP 5:
Press “1” for TONE dialing; then press “2” to indicate no PBX.
STEP 6:
Press “1” at the PROGRAM: OGM prompt.
STEP 7:
Using a prepared script and speaking six-to-eight inches from the dialer’s microphone on the front of
the unit, press “R” when you are ready to enunciate your emergency message.
STEP 8:
Press “1” to play back the recorded message. Press “1” again to accept.
STEP 9:
Press “1” at the PROGRAM: INPUT prompt.
STEP 10:
Press “2” to program input for CONTINUOUS activation.
STEP 11:
Once a selection is entered for the activation of the input, the dialer will return to the PROGRAM:
NUMBERS prompt.
PRESS “M” TO EXIT PROGRAMMING MODE
.
P r o g r a m P l a n n e r
19
