USO TS-12X, Руководство пользователя

Страница: 9 / 12

7
Parallax Adjustment
The TS-12X parallax knob is located on the left side of your optic
(as shown below). This dial is used to properly adjust image
focus (after your focus ring has been set). Properly adjusting
this knob will ensure that your image is in focus and free of
parallax effect.
Using the Parallax Knob
1. Ensure that you have properly set your focus ring to your eye
prescription by following the steps on page 3.
2. While on target, turn the parallax dial until the image is as
sharp as possible. NOTE: Use the yardage numbers on the dial
as a reference.
3. To ensure that you have properly adjusted your parallax
knob, move your head from side to side while looking through
your optic. If the target and reticle stay in place, then you have
properly set your knob.
4. If you see a shift in reticle positioning, readjust your knob in
small increments.