Unpacking:
The PROMASK 27 COLD LAMINATOR comes packed in one carton and is fully
assembled, ready-to-run.
Open the carton and carefully remove the machine by lifting it by its ends. Remove the
foam end caps and carefully cut and discard any tie straps retaining the accessories.
Save the shipping carton and foam inserts. If your machine should ever need to be sent
out for service, the proper shipping carton will help to ensure it’s safe transit.
Getting Started:
1.
Position the machine:
v
On a flat, dry, stable surface such as a table or laminator cart.
v
Within easy reach of a wall outlet.
v
So there is enough free space around the machine to accommodate
working with large mount boards.
v
Away from flammable materials.
v
Out of reach of children.
v
Away from sources of heat: such as radiators and heat registers.
2.
Plug in supplied foot pedal into socket located on the inside of the left frame
panel.
3.
Remove top and bottom supply mandrels from machine.
Page 3
