Midori
™
UDC3
www.ushio.com
16
When 2 batteries are charging at the same time, press
SLOT to select the charging slot (1) or (2). Then you
can view the individual charging information (ie. Battery
Type, Charging Status, Charging current, Charging
voltage & Charging time) for the selected charging slot.
To change charging speed: Default charging speed is
500mA, this can be increased to 1000mA for Li-ion,
IMR, and LiFeP04 batteries, to do that, simply press
[mode] button once. Digital screen will show the
updated charging current. (1000mA charging current is
NOT available for NIMH and NICO).
Note: 2A USB power source is needed to charge 2x Li-ion battery at
1000mA speed setting
Tip: It is safe to use 1A current option for Li-ion, IMR and LiFeP04
batteries as long as its capacity is higher than 1000mAh, for capacity
1000mAh or below, please stay with the default charging current
500ma for better battery life span.
Activate / Deactivate LiFeP04 charging mode: To
properly charge a LiFEpo4 battery (please check label
on battery to identify if it’s LiFeP04), LiFeP04 charging
mode will need to be manually activated.
To do that:
1. Press “slot” and “mode” button together.
2. Battery type screen will show [LiFeP04].
3. LiFeP04 charging mode is enabled
4. To get out of LiFeP04 charging mode, press 2 buttons together again.
Slot / Mode
