usha Steam Pro SI 3417, Инструкция по эксплуатации, Страница: 9 / 16

9
FIRST TIME IRONING
1 Remove any protective films or sticker from the soleplate and the cabinet, if any.
2 Unwind and straighten the power cord.
3 Fill the water tank. as described in “How to fill water”.
4 Connect the appliance to a suitable mains supply outlet.
5 Turn the Temperature Dial on the iron unit in clockwise direction to maximum
position, pilot light glows.
6 Pilot Light goes off when the required temperature is reached.
7 Move the steam control dial to position, steam starts coming out from the holes
in the soleplate
8 Begin first time ironing with an old towel.
9 When the water tank is empty and there is no more steam produced, the
preparation work is completed. The iron is now ready for proper use.
SPRAYING
1 This function can be used any time and is not affect any setting.
2 Fill the water tank as described in “How To Fill Water”.
3 Aim the nozzle to the garment.
4 Press the Spray Button.
Note: It may be necessary to press the spray button a few times to start this function
DRY IRONING
1 Unwind and straighten the power cord.
2 Connect the appliance to a suitable mains supply outlet.
3 Turn the Temperature Dial on the iron in clockwise direction, select dot-1, dot-
2 or dot-3 according to the recommendation of garment label. Pilot light glows
indicating the iron is switched on.
4 Pilot Light goes off when the required temperature for the iron unit is reached.
5 The appliance is ready for use.
6 Disconnect the power cord from mains supply outlet.
7 When the appliance gets cool completely, store it in a safe place.