To keep your USHA Mixer Grinder sparkling clean, just follow these steps.
1.
First remove the mains plug from the electrical socket.
2.
Clean the main unit using a damp/wet cloth, but do not use any abrasive cleaning materials.
3.
Run the jar with water for a minute after each use to clean the residue.
4.
Remove the jars after each use and wash the jars in soapy water.
5.
Then rinse with clean water
6.
Dry the parts thoroughly with a clean, soft cloth.
7.
Always keep / store the jar up side down.
8.
We recommend that you clean your USHA Mixer Grinder immediately after use for easier removal of
residue.
9.
Do not immerse the base unit in water or any other liquid.
10. Do not use any Abrasive cleaning agent or Harsh Steel Brush to prevent scratches.
11. The Main Unit is wrapped with SS sheet for decorative finish purpose, Use the soft dry cloth to wipe
clean.
CARE AND CLEANING
Trouble
CHECK POINTS
REASON
No power supply
Check main supply
Overloading of Material
Remove some material and add in
small quantities
Overload trip
Press the Overload trip button at the
bottom of Mixie
Other than above
mentioned
Call USHA care 18001033111
Motor housing
airvents blocked
Use a dry brush to clean air vents
Overloading of
Material
Remove some material and add in
small quantities
External heat source
Check and remove if any heat source
nearby
Uneven platform
that block airvents
Place the blender on level surface
Overloading of
material
Physical damage
It is advised that the cord be replaced by
an USHA authorised service technician
Remove some material and add in
small quantities
Mixer does not run
Motor cooling is
not sufficient
Increase in Mixing/
blending time
Unit overheating
Damaged Cord
This appliance is warranted for 2 years for the
product and 5 years for the motor against all
manufacturing defects from the date of sale.
In the event of any complaint, please contact
Usha Care at: Toll Free No. 1800 1033 111.
The warranty is valid only when:
1. The appliance has been installed, used and
maintained in accordance with the
instruction manual.
2. The warranty card and cash memo duly
signed by the authorized dealer are
presented with the complaint.
3. The appliance has not been opened or
tampered with, by any unauthorized person.
This warranty does not apply for:
1. Damages due to chipping, peeling, plating
and denting.
2. Breakage or damage to components made
out of Bakelite, Urea, ABS, SAN and such
plastic materials, rubber parts and cord.
3. Normal wear and tear of parts.
4. Damage resulting from accidents,
mishandling or negligence on part of the
customer.
WARRANTY CARD
TROUBLESHOOTING
Liability for consequential loss or damage is neither accepted nor implied.
S. No:
DATE:
CASH MEMO:
DEALER’S NAME AND ADDRESS:
OWNER’S NAME & ADDRESS:
9
10
