USE & OPERATION (CONTINUED)
FILLING WITH WATER (CONTINUED)
CLEANING & DRAINING THE WATER TANK
Move the unit to a location where the water can be drained. Remove the cap from the Drain plug
located at the bottom of the unit. Allow the tank to empty.
Refill the water tank with clean water, up to the maximum level and drain it completely.
Use a damp cloth to remove the dirt and dust from the surface of the unit. Never use corrosive
elements or chemicals to clean this product.
When the product is not in use, store the unit in a dry place away from direct sunlight.
•
•
•
•
WARNING:
Always ensure the water in the water tank is above the minimum (Min.) water level
mark for both Continuous & Manual Water Refill. Running the unit in Cool mode with
inadequate water may cause pump failure.
NOTE:
The water capacity refers to the total volume of water that can be contained within the
air cooler water tank and water distribution system. The water capacity in the tank at the “Max.”
indicator level may be lower than the actual water capacity of the air cooler.
WARNING:
Do not fill water tank with dirty water or salt water. This can damage the unit and
Honeycomb media.
WARNING:
Before cleaning the unit, switch the unit OFF and disconnect from the electrical socket.
If the cooler will not be used for a long period of time, please refer to the STORAGE & MAINTE-
NANCE GUIDELINES located in the separate Safety & Maintenance Guide.
EN
3
