www.usbgear.com
Technical (Power Supply Unit)
Input voltage
100~240V/AC,50~60Hz
Input current
0.45A
Output voltage
5V
Output current
4A
Mounting
You can set up the HUB on an even base or mount it by means of one to four screws (not included) on a stable base in
the desired orientation.
Operation
1.
Plug the USB A-plug of the cable into a free USB connection of your computer and plug the USB mini-plug into
the port of the HUB.
2.
Now you can connect up to four USB devices to the HUB. Each output has an LED indicator.
3.
The device supports Plug & Play and Hot Swap (device drivers are automatically detected and installed or devices
themselves can be removed while the OS is in operation)
4.
Connect the power supply unit to a socket with permissible operating voltage
5.
Plug the power supply unit into the power input jack provided for it on the hub or insert the USB cable into USB
port of your computer. The LED indicator will be light (red color)
6.
When insert the device into the USB port of the hub, the LED indicator of the port will be light (green color)
Product Safety
•
When used in conjunction with other devices, observe the operating instructions and safety notices of
connected devices
•
The product must not be subjected to heavy mechanical stress or intense vibration
•
The product must not be exposed to electromagnetic fields, extreme temperatures, direct sunlight or dampness
•
The product should not be used immediately after it has been brought from an area of cold temperature to an
area of warm temperature. Condensed water might destroy the product. Wait until the product adapts to the
new ambient temperature before use.
