USBDÜSEN NOZZCAM Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 52

USBDÜSEN NOZZCAM Скачать руководство пользователя страница 4

4

General

1 General

1.1 Information about this manual

This manual provides information on safe and efficient handling of the unit. This manual is part of the
unit and must remain in the immediate vicinity of the unit and accessible to personnel at all times.

The personnel must have read this manual carefully and understood it before beginning any work.
Complying with all safety and handling instructions in this manual is a basic prerequisite for safe work.

Local accident prevention regulations and general safety guidelines for the field of application of the unit
also apply.

The figures in this manual are intended to assist in basic understanding; the design of the actual unit
may differ somewhat.

1.2 Explanation of symbols

Safety instructions

The safety instructions in this manual are identified by symbols.
The safety instructions are preceded by signal words that express the severity of
the hazard.

To prevent accidents, personal injuries and property damage, always heed the
safety instructions and work cautiously.

DANGER!

This combination of symbol and signal word identifies an
imminently dangerous situation that will result in severe or fatal
injury if it is not avoided.

WARNING!

This combination of symbol and signal word identifies a
potentially dangerous situation that can result in severe or fatal
injury if it is not avoided.

CAUTION!

This combination of symbol and signal word identifies a
potentially dangerous situation that can result in minor or slight
injury if it is not avoided.

«
...
2
3
4
5
6
...
»

Содержание NOZZCAM





















































Отзывы:

Нет отзывов