• If you do not need to edit the four cap codes, you can press the
Menu Key
while the
ID number is flashing, to scroll through without changing that cap code.
• Each cap code can be enabled or disabled if required. “ON” is enabled and “– –“ is
disabled.
• The cap code programming continues until all cap codes have been set.
•
Change Frequency --The frequency must be entered in kHz. Ie: If your transmitter
works on 450.3375 MHz, you type in 4503375. The frequency
must
match that of your
paging system.
•
Press the
Read Key
until the cursor reaches the end of the line.
• The final query asks you to confirm that all entered settings are correct before writing
the settings to the pager. If everything is correct, press the
Read Key
, otherwise press
the
Menu Key
to go back to the cap code screen to make more changes.
• To exit the programming menu
at any time
, press the
Escape Key.
• Once the settings are written to the pager, the pager will restart. The pager will then
resume normal operation with the updated programming settings.