NP35 Numeric Pager
Hand Programming Manual
• Turn the pager off by pressing the
Menu Key
.
• Using the
Menu Key
, scroll through the various options until “Pager Off” is found.
• Press the
Read Key
to select this menu item. The pager will then turn off.
• Remove the battery from the pager.
• Now hold down both the
Menu Key
and the
Read Key
while inserting the
battery into the pager.
• You may be prompted for a four digit numeric password if this feature has been enabled
in the programming software.
Use the
Menu Key
to change fields and the
Read Key
to move to the next digit.
After the correct digits are entered, press the
Read Key
to proceed to the
programming menu. By default this password is “0200”.
• Once you are in the programming menu, you will see the first cap code ready for
viewing or editing. There are four or six cap codes available in total.
