USA Vinyl Weatherables, Руководство по установке

Страница: 3 / 4

We’re happy to help. Call 1-888-743-3673. 3
Gate Assembly
1. Lay the cross-brace on the gate and mark the length to cut.
2. Pre-drill holes into the cross-brace only. DO NOT pre-drill into the vinyl rail.
BRACING
(best configuration)
SELF-TAPPING SCREWS
(6/BRACE)
4
Tip : The hinge side of gate is where cross-brace is at bottom. The latch side of gate is where
cross-brace is at top. Mark either side with tape to ensure cross-brace is installed correctly.
3. Attach the brace using 2 self-tapping screws on each rail (total of 6 screws per brace).
Measuring Tape
Measuring Tape
1. Repeat the previous steps for the other post. This may take some assistance to do before the
adhesive sets.
2. Measure the top and bottom of gate to ensure both lengths are the same.
3