US USFF-300, Руководство по эксплуатации

Страница: 12 / 24

12
Cooking
●
Before using the equipment for the first time, use a mild detergent to wipe down for
cleaning. Do not use corrosive or abrasive detergents.
●Pour liquid edible oil or solid shortening into hydro-cylinder, and do not fill over the oil
level line
;
●If there is shortening, change to the lowest temperature to prevent burning and
charring
;
●Once temperature reaches the preset temperature place fryer basket in place.
●If the smell of oil changes during the process of frying due to too high temperature or
too many impurities in the oil
.
Change or filter oil to resolve;
Install the matched cooking fume exhauster according to the local regulations of the
char broiler;
Make sure to keep the air natural circulation in the kitchen.
Note: Each burner nozzle has been installed before delivery, normal use without
change but only switching gas.
Cleaning and Maintenance
This product is made with high quality stainless steel material, and should be maintained
carefully. Clean frequently to ensure better performance. Cleaning frequency depends on the
use intensity. Climate factors must also be taken into consideration.
Daily maintenance can
improve the life of the boiler.
●
Instructions to clean appliance regularly with recommended cleaning agents, if
necessary.
●
Clean the inner part of the hydro-cylinder, fryer basket, grid and drain oil pipe
:
1. Pour moderate water and detergent into hydro-cylinder (Do not fill over the highest
height of the oil level line)
2. After mix fully, turn on the main fire burner heating, turn off the main fire burner after
heating about 5-10 minutes;
3. Soak the hydro-cylinder, fryer basket and drain oil pipe in the solution for a period of
time;
4. When water temperature cools down to suitable body temperature, wipe the hydro-
cylinder inner wall and combustion tube surface with cleaning cloth, Use cleaning cloth on
the fryer basket, grid and drain oil pipe. Do not use, wire brush or a hard object to wipe
surface of the hydro-cylinder, wipe along the
direction of metal original polishing lines;
5. Turn on oil drain valve to empty slopes.
6. Rinse hydro-cylinder with clean water
.