Visit us online at www.USWaterSystems.com Give us a call at: 1-800-608-8792
30 US Water GreenWave Plus Salt-Free Water Conditioner | 385-
Your GreenWave system will improve the properties of water throughout your home. Here are
some things to expect and some recommendations for maximizing the benefits and your
enjoyment of your GreenWave system.
Sinks and fixtures - should have little or no spotting.
If water
is allowed to evaporate,
small spots may be left behind. This spotting should not require
any more than a wet cloth or sponge to remove. No harsh
chemical should be required as with typical hard water spotting.
Dishwasher-Spotting on dishes and on the surface of the
dishwasher should be greatly reduced or eliminated.
Dishwashing detergents low in phosphates are highly
recommended as they are better for the environment and
phosphates can cause spotting. In very hard water areas, the
use of a rinse aid may be advised.
Shower doors and tiles should have little or no spotting.
When
water evaporates off a surface, small spots may be left behind. These
spots should be easy to remove with a damp cloth or sponge.
In the bath
you may notice that soaps and shampoos lather more
than with untreated water. Soaps and shampoos will also rinse off
much easier and faster than they would with traditional soft water. We
recommend the use of modern soaps for the best results.
Things to watch for:
During the first 30-90 days:
Faucet aerators and drains may plug occasionally as old scale is removed from your
plumbing system and water heater.
You may also see milky water while the descaling is taking place. This is simply an increase
in the calcium in the water because GreenWave is removing old scale deposits from your
pipes.
Good practices:
If your dishwasher is severely coated with scale at the time of installation, we recommend that
you use a product like Lemishine, or Jet-Dry Dishwasher cleaner.. After this initial cleaning,
your GreenWave Plus system should keep it clean. We also recommend that you drain your
water heater tank. This should be done 30 to 60 days after GreenWave is installed, and again
in one year. This is a good practice that can dramatically increase the life of your water heating
appliance. Please follow the manufacturers instructions.
A Note to the Homeowner
