© 2010 US Water Systems, Inc.
6
Installation
1. Place the Fusion Upflow Calcite tank in the desired location on
a flat level surface.
2. Unscrew the head on the carbon tank, and go to page 7 to
follow the directions on loading the calcite into the tank.
3. Make sure that the tank head is tightened securely by hand
tightening—Do Not Use a Wrench. Hand-tight is
recommended.
4. Connect the water supply to the upflow inlet of the Fusion
Upflow Calcite Filter Tank.
5.
Connect the outlet (downflow inlet) of the Fusion Upflow
Calcite tank to the pipe that supplies the building in which the
tank is being installed
.
NOTE: With the Fusion Upflow Calcite
system, the tank is operated in the UPFLOW mode which is
opposite of some water softeners or filters.
6.
Therefore, the inlet is labeled
upflow inlet
and the
outlet
is
labeled
downflow inlet
, on the Fusion Upflow Calcite Tank.
.
.
Service Position
down-flow tank
As shipped, the bypass is set-up for
down-flow use. The arrow shape of the
handles points in the wrong direction
for UP-flow use. To convert it to UP-flow
use, pull up on the red handles until
they come off. Rotate the handle 180°
and put it back on the valve stem.
Service Position
UP-flow tank
Bypass Position
UP-flow tank
Bypass Valve Modification
Installation, Operation and Maintenance Manual
Fusion Upflow Calcite Filter, Cal-1, Cal-2, Cal-3 & Cal-4
