3
Proper Installation
This water treatment system must be properly installed and located in accordance with the
Installation Instructions before it is used or the warranty will be void.
Do not
install or store where it will be
exposed to temperatures below freezing or
exposed to any type of weather. Water
freezing in the system will break it. Do not
attempt to treat water over 100°F.
Do not
install in direct sunlight. Exces-
sive sun or heat may cause distortion or
other damage to non-metallic parts.
Maximum allowable inlet water pressure is
125 psi. If daytime pressure is over 80 psi,
night time pressure may exceed the maxi-
mum. Use a pressure reducing valve to
reduce the pressure.
WARNING:
Discard all unused parts
and packaging material after installation.
Small parts remaining after the installation
could be a choke hazard.
Specifications
Carbon Filter
Size
8” Dia x 35” H
Carbon Total
1 Cubic Foot
Connections
3/8” Quick Connect
RO System
Output
300 GPD
Recovery Rate
50%
Connections
3/8” Tubing
Filters
Sediment, Carbon and Re-mineralization Filter
Storage Tank
Material
Fiberglass
Bladder Pressure 8-10 PSI (Tank Empty)
Connections
3/8” QC
Sizes
30 Gal (16” Dia x 44” H) 40 Gal (16” Dia x 56.75” H) 80 Gal (24.25” Dia x
55.5” H)
Post Filter
Type
Carbon with Quantum Disinfection Media
Connections
3/8” QC
