US Water Systems 169-ISF-1, Руководство пользователя

Страница: 5 / 18

5
Specifications
Before Starting Installation
Tools, Pipe, and Fittings, Other Materials

Channel Locks

Screwdriver

Teflon tape

Razor knife

Two adjustable wrenches

Additional tools may be required if modification to
home plumbing is required.

The same, or larger, pipe size can be used as the
water supply pipe, but the outlet piping should be
the same as the inlet or smaller.

Use copper, brass, or PEX pipe and fittings.

Some codes may also allow PVC plastic pipe.

ALWAYS install the included bypass valve, or a 3
shut-off valves “H” valve bypass manifold. Bypass
valves allow the water to the conditioner to be by-
passed for repairs if needed, but still have water in
the house pipes.

5/8” OD drain line (not included) is needed for the
valve drain.

Continuous operation at flow rates greater than the service flow rate may affect capacity and efficiency performance.

The manufacturer reserves the right to make product improvements which may deviate from the specifications and
descriptions stated herein, without obligation to change previously manufactured products or to note the change.

The above capacity and flow rate specifications have not been validated by WQA.
Specifications
US Water inFusion Water Conditioning Systems
169-ISF-1 169-ISF-2 169-ISF-3 169-ISF-4
Carbon Capacity 1.5 2.0 2.5 4.0
Tank Size 10X54 12X52 13X54 16X65
Service Flow Rates
Normal 6 GPM 8 GPM 12 GPM 15 GPM
Peak 8 GPM 10 GPM 15 GPM 20 GPM
Backwash Flow Rate 5.0 GPM 7.0 GPM 9.0 GPM 15.0 GPM
Plumbing Connections 1” FPT
Electrical Requirements
Input 120V 50/60Hz - Output 24V
Water Temperature Min 39° F - Max. 100 ° F
Water Pressure Min 20 PSI - Max 125 PSI