US Robotics Wireless USB Print Server, Руководство пользователя

Страница: 56 / 103

Wireless USB Print Server User Guide
arp -s IP_Address 00:c0:02:xx:xx:xx
Where :
IP_Address is the IP Address you wish to assign to the Wireless USB Print
Server.
00:c0:02:xx:xx:xx is the hardware address of the Wireless USB Print Server.
Example: arp -s 192.168.0.21 00:c0:02:12:34:56
You should then assign this IP address to the Wireless USB Print Server using your
Web Browser. Launch the Web User Interface and go to the TCP/IP section. Select
Fixed IP Address and then enter the appropriate information.
Note : The hardware address of the Wireless USB Print Server is shown on a
sticker on the base of the device.
Other Wireless USB Print Server Configuration
The recommended method to configure the Wireless USB Print Server is to use the
Web User Interface.
●
Ensure that the TCP/IP settings are correct for your network.
●
The logical printers (e.g. L1) must be configured correctly to match your
system.
LPD Configuration
Configuration for LPD on IBM AIX 4.15 , LPD on System V , LPD on Linux , and
LPD on BSD are described below.
LPD on IBM AIX 4.15
Before proceeding, ensure that the Wireless USB Print Server has been assigned an IP
file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/install_unix.htm (2 of 8)9/14/2006 4:36:16 PM