Modemulator User Guide
Page
19
of
113
The MVNO will provide a document listing the peer-to-peer static IP address assigned to this SIM.
Make note of this IP address for later use.
b.
Insert the SIM into the SIM slot as shown in Figure 2.
Figure 2
c.
Replace the top cover plate and its four TorxT6 screws.
Preparing for CDMA Networks
Devices connecting to a CDMA network do not require a SIM. After the MVNO has provisioned the data
service, the Modemulator will automatically activate itself onto the CDMA network.
The MVNO will provide a document listing the peer-to-peer static IP address assigned to this
device. Make note of this IP address for later use.
Connecting to the Cellular Network
1.
Power up the Modemulator by plugging the provided power supply into the connector on the back
of the device.
The Modemulator will take about two minutes to become operational.
The Modemulator card uses the gateway resources for cellular connectivity. So the gateway must
be setup for cellular connectivity before using Modemulator functionality.
2.
Use an Ethernet cable to connect the gateway’s Ethernet port to and a computer Ethernet port.
3.
Open a web browser on the computer and enter the address
192.168.1.1
into the address bar.
Enter the default username (
admin
) and password (
admin
). After a successful login, the Home
screen will appear.
