US Robotics USR1120, Справочное руководство

Страница: 3 / 11

11 Mbps Wireless USB Adapter Installation
Note: For the most recent installation information, refer to the product Web site at
http://www.usr.com/support . You can also refer to the User Guide on the Installation CD-
ROM for more detailed information.
Step One: Prepare for Installation
Turn on your desktop or laptop computer. Type your password if you are prompted to do so.
Make sure you have an available USB port on your computer.
Note: It is important that you have your serial number written down before you install the
11 Mbps Wireless USB Adapter. If you ever need to call our Technical Support department,
you will need this number to receive assistance.
Note: Be sure to find out what letter your CD-ROM drive uses before you begin installing
your new product. You will need to know this to properly install your software.
Step Two: Install your software
Note: You will need to install this software on all of the PCs or laptops you plan to wire-
lessly network together using wireless USB devices.
Insert your Installation CD-ROM into your CD-ROM drive.
Note: If the Choose Setup Language window appears, select your preferred language and
click OK .
Note: If your CD-ROM does not automatically launch, click Windows Start , Run , and type
D:\setup (or the appropriate letter of your CD-ROM drive) and click OK .
Some files will be copied to your system, and then you will be asked to read the license agree-
ment. Read the agreement and click
Yes .
The Installation CD Graphic User Interface (GUI) will appear on your screen. Click Software .
Click Install Wireless Adapter Configuration Utility . Follow the on-screen instructions and wait
for some files to be copied to your hard drive.
You will be prompted to select your Wireless Mode. Select Infrastructure Mode if you will be
using a Wireless Access Point. Select 802.11 Ad-Hoc Mode if you will be in a peer-to-peer net-
work. After you select your Wireless Mode, click Next .