US Robotics Courier V.Everything, Руководство по началу работы

Страница: 44 / 102

Macintosh 5-1
Chapter 5
Configuring Your Courier For Macintosh
This chapter explains how to configure your Courier V.Everything for use
with Macintosh computers.
Note: There are many ways to configure your Macintosh to use the
Internet. Consult your Macintosh documentation for more information.
Handshaking Cable
Use a hardware handshaking cable to connect your Courier V.Everything
to the Macintosh.
System Configuration
Also, if you aren’t using AppleTalk® Remote Access (ARA), set
AppleTalk to Inactive (in Chooser).
Important: Your Macintosh Courier V.Everything DIP switches should
have been set to 3, 5, and 8 ON. To use the Courier V.Everything with
your Macintosh you must also set DIP switch 1 to ON.
The modem initialization string should be AT&F1&D0.
For instructions about how to set up your Macintosh communications
software package, consult your Macintosh documentation or visit the U.S.
Robotics Totalservice web site at http://totalservice.usr.com.
Accessing the Internet
Accessing the Internet through an ISP requires the following software:
•
MacTCP or Open Transport (TCP/IP from the Control Panels menu),
which has probably already been installed on your Macintosh
•
SLIP or PPP dialing software
Note: You can find public domain PPP dialers (such as MacPPP and
FreePPP) on the Internet.