Rev 1.0
1/27/14
32
32
Reference Guide
Interfaces
Figure 23. Secondary RF Connector for USR3500
The GPS RF interface is used for GPS antenna connection. It is an MMCX type
connector and its nominal impedance is 50
Ω
. It also provides bias for active antenna.
For more details, refer to section 3.2.2.3.6 Active GPS Antenna Bias.
Figure 24. GPS RF Connector for USR3500
3.2.2.1.
RF Performances
RF performances are compliant with ETSI recommendation GSM 05.05. Refer to the
tables below for the main parameters used for both the Receiver and the Transmitter.
Table 20. Main Receiver Parameters for USR3500
Parameters
Typical Values
GSM850 Reference Sensitivity
-108dBm
E-GSM900 Reference Sensitivity
-109dBm
DCS1800 Reference Sensitivity
-107dBm
PCS1900 Reference Sensitivity
-107dBm
3G Band I 2100 Reference Sensitivity
-108dBm
3G Band II 1900 Reference Sensitivity
-107dBm
3G Band V 850 Reference Sensitivity
-110dBm
3G Band VI 800 Reference Sensitivity
-110dBm
3G Band VIII 900 Reference Sensitivity
-108dBm
Selectivity @ 200 kHz
> +9dBc
Selectivity @ 400 kHz
> +41dBc
Linear dynamic range
63dB
Co-channel rejection
>= 9dBc
Table 21. Main Transmitter Parameters for USR3500
Parameters
Typical Values
Output power at PCL5 (EGSM & GSM850)
32dBm
Output power at PCL0 (GSM1800 & PCS1900)
29dBm