US Robotics 9108, Быстрое руководство по установке, Страница: 10 / 136

8
At this point, the system attempts to access the Internet. This may take a few
minutes, until the following status page appears.
If the status is CONNECTED TO THE INTERNET , you have successfully configured
your Internet connection. If it does not say CONNECTED TO THE INTERNET , go to the
Troubleshooting section of this installation guide.
Step 5. Set Up the Wireless Configuration
In wireless communications, devices communicate with each other via radio waves rather
than cables. The gateway can communicate wirelessly with any device that has a wireless
network adapter that meets wireless networking standards.
To set up wireless communications, click Status at the top of the screen (if it is not already
open). Then click Configure Wireless . This opens your Web browser to a page for setting