background image

54

/LPLWHG:DUUDQW\

U.S. Robotics Access Corp. warrants to the original end-user purchaser that this product will be free from defects in
materials and workmanship for a period of five years from the date of purchase.  During the limited warranty period,
and upon proof of purchase, the product will be repaired or replaced (with the same or a similar model, which may
be a refurbished model) at U.S. Robotics’ option, without charge for either parts or labor.  This limited warranty shall
not apply if the product is modified, tampered with, misused, or subjected to abnormal working conditions (including,
but not limited to, lightning and water damage).

THIS LIMITED WARRANTY DOES NOT GUARANTEE YOU UNINTERRUPTED SERVICE. REPAIR OR
REPLACEMENT AS PROVIDED UNDER THIS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE
PURCHASER.  THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR USE OR PURPOSE. U.S. ROBOTICS SHALL IN NO EVENT BE LIABLE FOR ANY SPECIAL,
INDIRECT, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND OR CHARACTER,
INCLUDING, WITHOUT LIMITATION, LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR
OTHER BENEFITS, LOSS OF DATA OR USE, DAMAGE TO EQUIPMENT, AND CLAIMS AGAINST THE
PURCHASER BY ANY THIRD PERSON, EVEN IF U.S. ROBOTICS HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.

This limited warranty gives you specific legal rights. You may have others, which vary from nation to nation. Some
nations do not allow limitations on duration of an implied warranty, or the exclusion or limitation of incidental or
consequential damages, so the above exclusion or limitation may not apply to you.

Содержание 001171-00



























































Отзывы: