E3 Assembly Instructions
Local: 360.260.2468
▪
Sales: 800.736.0194
Support: 360.397.9999
▪
Fax: 360.260.2469
1400 NE 136
th
Ave.
▪
Vancouver, Washington
▪
98684
▪
USA
1.0
Page 2
Step 4:
Encoder Module Installation
Orient the module with the connector pins toward the top.
Slide the module on to the base from front to back, being
careful not to damage the disk or module. Fit the module
on to the two alignment pins on the base, and secure with
two 4-40 1/2" pan head screws (supplied).
Step 5:
Cover Installation
Place the cover over the assembly and secure with two
4-40 5/8" flat head screws (supplied).
Module Screws:
3.5-4 in-lbs
Cover Screws:
2-4 in-lbs torque