USB 9640 5-Channel LED PAR
© US Blaster Europe BV
AC power
The fixture’s mains lead may require a grounding-type cord cap that fits your power distribution
cable or outlet. Consult a qualified electrician if you have any doubts about proper installation.
WARNING: For protection from dangerous electric shock, the fixture must be grounded
(earthed). The AC mains power supply shall have overload and ground-fault
protection.
CAUTION: Verify that the feed cables are undamaged and rated for the current
requirements of all connected devices before use
.
Following the cord cap manufacturer's instructions, connect the yellow and green wire to ground
(earth), the brown wire to live, and the blue wire to neutral. The table below details some pin
identification schemes.
Wire
Pin
Marking
Screw color
Brown
Live
“L”
Yellow or brass
Blue
Neutral
"N”
Silver
Yellow or green
Ground
〨
Green
Understanding DMX
About DMX
DMX is the abbreviation of Digital Multiplex. It’s a universal protocol used by most audio, lighting
and controller manufactures as a form of communication between fixtures and controllers. A DMX
controller sends out DMX data instructions to the fixtures via 5-pin XLR cables. The data travels
through the DMX chain as a serial data.
DMX is a kind of "common language" allowing all products of different manufactures to be linked
together and operate from a single controller, as long as all fixtures and the controller are DMX
compatible. To ensure proper DMX data transmission, when using several DMX fixtures try to use
the shortest cable path possible.
DMX Cable Requirements
:
Your fixture,
USB 9640
uses 3-pin XLR cable as connection media. We provide each fixture with
a 3-pin XLR cable for you to chain the fixtures.
