Urtopia Carbon E-Bike, Руководство пользователя

Страница: 18 / 24

18
BATTERY
Your e-bike is powered by a modern lithium-ion (Li-ion) battery. They offer a large capacity (range) with the lowest weight. In
addition, they do not suffer from memory effect.
Your battery is protected by a modern management system against overcharging and short-circuits.
Basics
The removable battery pack can be charged with or without a bike. Locate the charging port and plug the connector into the
charging port to start charging.
Do not use high pressure water streams to clean your e-bike, as water might seep inside the motor or the wiring compartment and
cause rusting of electric parts or short circuits. Please use damp cloth with neutral detergent to clean the bike body. Do not use
alkali-based or caid based detergent such as rust cleaners as it may result in damage and/or failure of the bike body.
Avoid parking your e-bike outside when there is rain or snow. At the end of a trip where there was rain or snow, bring the e-bike
inside and use a clean, dry towel to eliminate any wetness.
During daily use,please keep the controller clean and dry.keep it away from water,vibration and contamination, otherwise the
controller may be damaged.
Recommended cleaning method
You must turn on the battery to use the e-bike in Electric-Assisted mode.
In the Electric-Assisted model, power assist is triggered when you pedal forward, and power assist stop when you stop pedaling.
In other words, power assist happens as long as you pedal. You don’t need to pedal hard. All you need is to apply a light force
to the pedals continuously to maintain the current flow. When you apply one of the brakes, power-assist will automatically stop.
allowing the e-bike to slow down and stop. Power assist will turn itself off when the e-bike has reached the maximum speed of
25km/h.
Electric -Assisted