Lift top of case carefully. Watch out not to damage the yellow-green ground
shielding cable inside while opening the housing. If disconnecting this cable
do not forget to connect again when closing the case.
The switch for changing mains voltage is located on print assy between blue
mains transformer and front of housing. Standard setting is 240 Volt AC. If
necessary switch to 120 Volt AC. Next to this switch the mains fuse is located,
protected by a clear plastic cap.
The switch for changing mains voltage is located on print assy between blue
mains transformer and front of housing. Standard setting is 240 Volt AC. If
necessary switch to 120 Volt AC. Next to this switch the mains fuse is located,
protected by a clear plastic cap.
Содержание M2
Страница 1: ...2 M A N U A L ...
