Ursalink UR75 Edge, Руководство пользователя

Страница: 64 / 169

UR75 User Guide
64
Router ID Router ID (IP address) of the originating LSA.
ABR Type Select from cisco, ibm, standard and shortcut.
RFC1583 Compatibility Enable/Disable.
OSPF Opaque-LSA
Enable/Disable
LSA: a basic communication means of the OSPF routing
protocol for the Internet Protocol (IP).
SPF Delay Time
Set the delay time for OSPF SPF calculations.
Range: 0-6000000, in milliseconds.
SPF Initial-holdtime
Set the initialization time of OSPF SPF.
Range: 0-6000000, in milliseconds.
SPF Max-holdtime
Set the maximum time of OSPF SPF.
Range: 0-6000000, in milliseconds.
Reference Bandwidth Range: 1-4294967, in Mbit.
Table 4-2-7-4 OSPF Parameters
Figure 4-2-7-5
Item Description
Interface
Interface Select interface from "cellular0" and "GE0".
Hello Interval (s)
Send interval of Hello packet. If the Hello time between two adjacent
routers is different, the neighbour relationship cannot be established.
Range: 1-65535.
Dead Interval (s)
Dead Time. If no Hello packet is received from the neighbours within
the dead time, then the neighbour is considered failed. If dead times of
two adjacent routers are different, the neighbour relationship cannot
be established.
Retransmit
Interval (s)
When the router notifies an LSA to its neighbour, it is required to make
acknowledgement. If no acknowledgement packet is received within
the retransmission interval, this LSA will be retransmitted to the
neighbour. Range: 3-65535.
Transmit Delay It will take time to transmit OSPF packets on the link. So a certain delay