Urrea 23623, Руководство пользователя и гарантия

Страница: 7 / 12

4
5
6
1
7
8
2
3
WARNING: Remove the pump from its pac-
kaging and carefully examine it. Do not discard
the packaging until all parts have been exami-
ned.
WORKING OF PUMP
• The pump has a spring loaded wave action
mechanism installed at the bottom of the
bucket.
• Pressing the foot lever makes a cylinder to
move forward leaving empty space behind it.
The grease due to its weight fills this empty
space.
Cylinder in open position
Spling loaded mechanism
• On releasing the foot lever, the cylinder re-
turns to its original position pushing the ac-
cumulated grease into a hollow piston that
throws the grease from the pump outlet into
delivery hose.
Cylinder in closed position
Hollow piston
• Subsequent strokes of the foot lever fill the
delivery hose & discharge begins from the pis-
tol handle.
PRIMING THE PUMP
Priming is getting the pump started by oper
ting foot lever for 3-4 minutes until grease gets
dispensed from the the pistol handle.
Always PRIME the pump when using it for the
FIRST time.
When working in cold weather or using a thic-
ker grease, keep grease thin for easy workabi-
lity in one of the following ways:
• Mix some oil (SAE30) with grease. Shake the
bucket & press the mixture thoroughly to re-
move any air pockets
• Heat grease bucket with a Barrel Warmer or
Heating Jacket. The temperature should be
kept at 0 - 30°C (32 - 86°F)
While filling grease for the first time:
• Do ensure that grease is well settled down.
• Use steel plate or press grease by hand (use
plastic gloves and then lift and tap the bucket
on the ground 5 to 6 times to allow the grease
to settle and drive out big air pockets).
OPERATION AND USE
1. Fill correct grade grease into the pump
bucket.
2. Tamp the bucket on a firm surface to push
7
E N G L I S H •
User’s manual