18
Chapter
3
Using
the Device
Installing the SIM Card, Memory Card and Battery
1.
Rotate the master battery cover buckles by 90 degree to remove the
battery cover.
2.
Insert the SIM card or Micro SD/TF card into the combo deck in the
battery compartment and fasten the buckle.
3.
Install the battery properly, close the battery cover, and fasten the
buckles.
Note:
Only 50% electricity remains in the battery when you use the
battery for the first time. You can charge the battery by using the power
adapter or a seat charger (purchased separately). The first charging must
be more than 12 hours.
Powering On/Off the Device
The i3000 product is powered off when you obtain it for the first time.
After you press and hold down the power button, the indicator is turned on
and the Windows CE screen is displayed. Then you can release the button
to power on the device.
When the device is not used, you can switch the device into sleep mode or
power off the device to save electricity.
1.
If you shortly press the power button when the device is in
powered-on mode, the device is switched to sleep mode.
When the device works in sleep mode, power is provided to certain
components and data in the memory is retained. You can press the power
button again to switch back to wake-up mode.
