sec.2b
−−−−
5
K-STEEL CALL MODULE
BIBUS 2
nd
Ed. VOP - Technical Manual
Ref.
072/
4
K-STEEL CALLING MODULE WITH REPERT
ORY
ADjUSTMENTS
vOLUME ADjUSTMENT
Volumes are calibrated by default so not to require adjustments in
most cases.
Use a screwdriver to adjust the trimmers if required.
DISPLAY CONTRAST REGULATION
The display contrast is set at the factory and will not need to be
adjusted in most installations.
Use a screwdriver to adjust the trimmers if required.
K-STEEL CALLING MODULE WITH REPERTORY Ref. 072/4
ADjUSTMENTS - ADDITIONAL ALPHABETIC KEYBOARD REF. 038/73
INSTALLATION
ADDITIONAL
ALPHABETIC
KEYBOARD
Ref. 038/73
The additional alphabetic keyboard Ref. 1038/73 can be used to
entered letters for dialling call codes.
The device must be combined with a calling module Ref. 1072/14 to
which it is connected by means of the specific connection wire. In any
case, the device must be arranged UNDERNEATH (or by THE SIDE
OF) the calling module.
INSTALLATION
Calling module with repertory Ref. 1072/14 can be used alone or in
combination with a camera unit and/or alphabet keyboard add-on
Ref. 1038/73.
Examples of modular constructions using 2 or 3 module holder frames
with respective flush-mounting boxes are shown below.
The door unit module should be installed at a height of approximately
1.55 ÷ 1.60 metres.
Important
The module should not be illuminated from behind to make the calling
module display easier to read. Never direct the module towards
strong sources of light (e.g. the sun, lampposts, light bulbs, flashes
or glare).
FLUSH-MOUNTED vERSION
The flush-mounting box and respective frame must be used for flush-
mounted installation.
The available models, dimensions and box and frame installation
procedures are shown in Technical product manual - door phone and
video door phone systems - section “Modular Vandal-Proof Panel K-
Steel”.
1. Refer the protections from the hole to be used to pass the wires
only from the flush-mounting box.
X
G
D
A
J
H
E
B
I
F
C
h = 1,55
÷
1,60 m
X
7
4
1
0
8
5
2
9
6
3
