12
DS1717-021B
It is also possible to send pre-fixed sequences of 10 pulses plus one pause, selecting, at the top, one of the
possible sending options.
For example, if an MTR2000ER relay module was 'connected' and you wish it to have a 15 minutes' timed
output (e.g. for irrigation of a garden), then:
-
Send 23 (
E 23
) to unlock the module configuration and wait to see 3 flashes on the receiver.
-
Send 27 (
E 27
) to switch the module to the timer mode and wait to see 7 flashes on the receiver.
-
Send 26 (
E 26
) to configure the duration in minutes and wait to see 6 flashes on the receiver.
-
Send 14 (
E 14
) to configure a 15-minutes' timed interval and wait to see 4 flashes on the receiver.
-
Send 21 (
E 21
) to lock the module configuration and wait to see 1 flash on the receiver.
While if you wish the MTR2000ER connected module to work in impulsive mode (i.e. the module generates a
0.5 seconds' pulse each time that the button is pressed), for example to control the opening of a gate, then:
-
Select the mode 'M' in the top right corner.
-
Send 16 (
M 16
) to configure the IMPULSIVE mode and wait to count 6 confirmatory flashes on the
Video door phone LED.
Note: as was mentioned here above, receiver module configuration only works if the button has been
connected to a single receiver module.
1.1.2 Yokis Buttons Configuration via remote control
1) Using a TLC8CP 8-Buttons remote control, configure the buttons of the remote control itself. Refer to the
Yokis Radio Quick Installation Guide for more information.
2) Check that all configured buttons are working efficiently.
3) Now import the remote control to the Video door phone, as described here below.
WARNING: the importing procedure will delete the configuration of ALL 8 Yokis buttons of the Video door
phone.
Содержание IperVoice 1717/31
Страница 23: ...DS1717 021B 23...
