PUSH BUTTON PANELS
PUSH BUTTON PANEL EXIGO
sec.3g
−−−−
BIBUS 2
nd
Ed. VOP - Technical Manual
Screws A (3.5 x 16mm) are provided with the spacer.
The box and spacer must be installed flush with the wall without
protruding at a height of approximately 1.55 ÷ 1.60m from the floor.
The flush-mounting depth of all boxes is equal to 60mm (45mm for the
box + 15mm for the spacer).
DOOR UNIT INSTALLATION PROCEDURE
Do not fit the seal on the microphone provided with the door
unit.
C
Screws C are included with the front panel and not with the door
unit.
§
§
PUSH BUTTON PANEL EXIGO
PANELS FOR SINTHESI FLUSH-MOUNTING BOXES
Ref. 1143/60
Flush-mounting box
60 mm
NAME TAG BACK-LIGHTING LED FASTENING
PROCEDURE
Use the template provided with the front panel to fasten the name tag
lighting LEDs. Cut all the flush-mounting box columns shown b
y
, and then drill at the points indicated by
.
Fix the spacers to the flush-mounting box and fix the LED circuit to
the spacers.
SINGLE LED CIRCUIT
MULTIPLE LED CIRCUIT
TEMPLA
TE
2,9 x 6,5mm
2,9 x 6,5mm
2,9 x 9,5mm
2,9 x 9,5mm
2,9 x 9,5mm
2,9 x 6,5mm
