Door open codes
The 1038/16 call module uses two different passwords;
9998 is the default
Engineer’s
password and this allows access to the configuration of the
system.
9999 is the default
Caretaker’s
password and this only allows access to the door open codes
and the names programming.
The
Caretaker’s
password is automatically the
Engineer’s
pa 1. So if the
Engineer’s
password had been changed to 1066 for example, the
Caretaker’s
password would
automatically be changed to 1067.
To enter either password you must first press 00. You will then see –
Enter the
Caretaker’s
password then press
Important note – If the 1038/16 which is to be replaced is part of a complex installation with
main and secondary call modules AND it is not possible to retrieve the existing programming
information then you must contact Urmet Technical Support.
An example of a complex installation with main and secondary call modules is as follows –
MAIN call modules.
Call all apartments
SECONDARY call modules.
Call a specific group of apartments
If the keypad of the 1038/16 is also being used to open the door, read
this section. If not then then read on from page 4
2
