12
−−−−
sec. new 2009
2GO! - Technical manual
ne
W
TONE SELECTION
Five tones can be selected on 2GO! system indoor stations. The tones
can be programmed also by the end user by following the simple
sequence below.
DOOR PHONE CALL TONE
1. Hold the door opener button pressed. Press and release the
button
. The indoor station will play a tone.
2. Hold the door opener button pressed and press the button
again to change the tone.
3. Release the door opener button when you have chosen the tone
you want. The tone is now programmed.
The selected tone will be the same for all door phone calls. The source
of the call can however be distinguished by timing the tone:
Call origin
Time
Call from main door unit
3s ON
Call from secondary door unit
0,4s ON-0,2s OFF for 5 times
Intercom call
0,5s ON-0,5s OFF for 5 times
FLOOR CALL TONE
1. Hold the door opener button pressed. Press and release the
button . The indoor station will play a tone.
2. Hold the door opener button pressed and press the button
again to change the tone.
3. Release the door opener button when you have chosen the tone
you want. The tone is now programmed.
The
fl
oor call timing is
fi
xed (3 seconds).
PROGRAMMING DATA DELETION
Proceed as follows to delete all optional programming data:
1. Hold the door opener button pressed and pick up the handset.
2. Press
and on the video door phone at the same time for 3
seconds until you hear the deletion tone.
3. Release buttons and hang up.
ARCO BLACK/WHITE VIDEO DOOR PHONE Ref. 1715/1
TONE SELECTION
ARCO BLACK/WHITE VIDEO DOOR PHONE
Ref. 1715/1
