DS1054-055A
P17
▶
While the message “
rec E5
” flashes for 30 seconds, briefly press in the “Connect” hole
on the receiver module with a sharp, properly insulated tool.
▶
The THERMARP thermostat will briefly display the
PASS
message if the pairing was successful.
▶
The THERMARP thermostat is now correctly paired
with the receiver and controls the receiver to adjust
the boiler or solenoid valve to 230V according to the
set temperature values.
Important: The THERMARP thermostat may
not be able to communicate with the receiver
if it is out of range. The message
Err. 17
will
appear on the display in this case
.
See the “How to extend the range” paragraph
.
HOW TO EXTEND THE RANGE
All YOKIS wireless receivers also serve as signal repeaters. By adding one or more mod-
ules, you can significantly extend the wireless range by creating a wireless bus between
the various modules on the system.
Led
Connect
1 press
▶
In the RF WIRELESS menu, use buttons
and
to navigate the menu and open
the
rec E5
pairing submenu on the display. Then tap on the “Validate” icon
.
