urmet domus 1099/212, Быстрое руководство

Страница: 12 / 40

DS1099-063A 12
EN
1 Warnings
Image recording
➢
This device was mainly designed to transmit and possibly record images, not as a
burglar alarm. Urmet S.p.A. cannot be held liable for loss or damage following theft
sustained by the user.
➢
Test recording before using the device to make sure that is working correctly. Please
note that Urmet S.p.A. is not liable for loss of stored data consequent to loss or damage
caused by incorrect installation, use, improper use or malfunctioning of the device.
➢
This device contains precision electronic components. Protect the device from shocks
to ensure correct recording of images.
Privacy and Copyright
➢
The IP camera is a CCTV system device. Recording of images is subject to the laws in
force in your country. Recording of images protected by copyright is forbidden.
➢
Product users shall be responsible for checking and respecting all local rules and
regulations concerning monitoring and recording video signals. The manufacturer
SHALL NOT BE LIABLE for use of this product not in compliance with the laws in force.
For more information see the website http://www.garanteprivacy.it.
Firmware upgrade
➢
Periodically check the URMET Customer Service Technical Area for firmware upgrades.
Network connections
➢
When connecting to a remote PC (using Client Software or browser), remember that
all video channels used by the PC correspond to a “unicast” type connection (TCP, RTP,
UDP).
➢
The device is capable of supporting a limited number of “unicast” connections, i.e. it
can display the video stream from up to 4 remote stations (of which no more than two
smartphones) at the same time, compatible with the available bandwidth.
Reset button
The camera is equipped with two Reset buttons:
➢
Button on the cable (press for at least 3 seconds): this can be used to
reset all the factory settings of the IP camera only (e.g. camera password,
video stream, image settings, motion detection, recording, etc.). It leaves
the WiFi and 4G configurations unchanged.
➢
Button adjacent to the nano-SIM slot: this can be used to restore all factory settings
for the integrated 4G/WiFi router only. It leaves the IP camera configurations
unchanged .
2 Simplified EU declaration of conformity
Hereby, URMET S.p.A. declares that the radio equipment type: camera 1099/212 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address: www.urmet.com