5
EN
Installation specifications
• Avoid pointing the lens directly towards the sun or intense sources of light also when the camera is off. The
subject must not be backlight.
• Do not point the camera towards reflecting objects.
• Some lighting systems (e.g. coloured fluorescent lights) may false the colours.
• Arrange a suitable circuit breaker and fuse upstream of the devices.
• Make sure that the rating plate data correspond to the power specifications before connecting the device to the
mains.
INSTALLATION
1. Make sure that no units are powered before starting the installation procedure.
2. Position the bracket in order to point it to the direction useful to capture images; it is possible to adjust the
camera on HORIZONTAL, VERTICAL and TRANSVERSAL axes.
Adjustments
Loosen the screws with the supplied allen wrenches in order to move the bracket in any direction:
• position the bracket on horizontal, vertical and transversal axes
• point the camera in the desired direction. Once made, firmly block.
* Important note: In order to avoid serious damages to the connection cable, avoid rotating repeatedly and
excessively the camera fixed to the bracket.
3. Position the wireless cameras in required installation point and power them. Then pair a free channel of the
WiFi NVR.
4. In order to prevent loss of video signal, it is advisable to install the cameras and orient the aerials so as to
guarantee a stable wireless signal indication of at least two lines for each camera on the video stream shown
on the NVR.
5. If the camera is not automatically detected by the NVR, proceed with the manual pairing procedure on the NVR
menu by pressing the button corresponding to the channel to be paired and then pressing the pairing button on
the camera within 10s.
* Important note: For more information, refer to the instructions manual or quick guide of the NVR on the Urmet
website. To download the manual or quick guide of the WiFi NVR from the website, see the QR code on the quick
guide of the WiFi kit.
OPERATING FEATURES
IR LED operation
The device is provided with a CDS sensor that switches the IR LEDs on when the light is approximately 5 Lux.
