urmet domus 1093/040S, Быстрое руководство, Страница: 43 / 84

DS1093-028 43
3.2 MANUAL RECORDING
Press “ REC ” on the front panel of the device in
LIVE
mode.
The following login window shown in the following figure will appear.
Figure 34: recording menu for device Ref.1093/040S
The selected item is highlighted.
Press arrows “
◄► ” to point the cursor to the various menu items.
Press “
ESC
”. to quit the menu.
e
IMPORTANT NOTE
•
The device will resume recording only recording tasks programmed in the R
ecording
menu after a blackout.
Recordings started manually will not be resumed after a blackout.
3.2.1 CHAN
This item (not selectable) lists all the channels of the device.
3.2.2 STATUS
This item (not selectable) shows the status of each video channel by means of a series of LEDs.
The following modes can be displayed:
¾
→
the channel is not active
¾
green
→
the channel is recording (manual, real time, motion detection, external alarm)
¾
red
→
transmitting on the network
¾
amber
→
recording and transmitting on the network
3.2.3 START/STOP
This option is used to start/stop the recording on a certain video channel.
To set, select the respective check box using “
◄► ” and press “
ENTER
” or “
EDIT
”.
Symbol “ 9 ” indicates that recording can be started on a selected channel; symbol “ × ” indicates that the recording can be stopped.
The following will light up on a channel when recording is started:
¾
pink icon on the camera status bar shown on the monitor.
3.2.4 START ALL
Select this option and press “
ENTER
” or “
EDIT
” to start recording all video channels at the same time.
3.2.5 STOP ALL
Select this option and press “
ENTER
” or “
EDIT
” to stop recording all video channels at the same time.
e
IMPORTANT NOTE
To proceed with manual recording:
¾
the user must have the corresponding privileges
¾
at least one hard disk must be installed in the device
¾
the hard disk must be formatted