DS1093-162A
29
Click [Main menu
Network
Mobile] to enter into the [Mobile] interface shown as Mobile Picture in 2.4.4.5 Section.
User Name:
indicate user name of DVR, and support numbers and characters and 1~15 bits length
User password:
indicate user password of DVR, and also support numbers and characters and 1~15 bits length
Server port:
Mobile monitoring port. Setting range is between 1024 and 65535.
•
SMTP Port:
indicate one kind of mail transmittal port opened by Simple Message Transfer Protocol (SMTP). The
port number for most mails is 25 except such as Gmail server (Port No.: 465).
•
SMTP server:
indicates server address you used.
•
Sender address:
indicates sender’s email address. The email address should be consistent with the server you use.
That is to say, when you use email address –
, the according server should be smtp.gmail.com.
•
Sender Pwd:
Set the Password assigned to the sender Email Account.
•
Receiver address:
indicates receiver’s email address. The email address is used to receive image transmitted from
DVR alarm. Please clear the images you have received as soon as possible to avoid overloading your email account.
•
Interval:
It is possible to set the minutes value that the Email is sent with attachments.
Note:
When configuring the messages sent via e-mail (Main menu
→
Devices
→
Alarms), to ensure the correct operation it is
suggested to configure a user account (that is sender address and password) with the same address as the SMTP
Server. For example, if an address like
is used, the SMTP must be “
smtp.dominio.it
”.
It is possible to schedule the sent Emails for Channel and Weekday about Events Detection (i.e. Motion, Alarm or
Exceptions) as shown in picture below:
