urmet domus 1092/291, Инструкция по эксплуатации

Страница: 6 / 12

6
DS1092-112A
INSTALLATION
1. Before installation, make sure that all devices to be connected are not powered
2. Identify the suitable position for shooting the selected images (the camera is put inside the PIR case
and the images are shot though the tiny hole on the front part) .
Important note
For an easy installation, it is possible to use the 1092/400 portable LCD monitor to be connected to
the BNC connector of the device.
3. In order to remove the sensor cover, press on the fixing snap.
4. Identify the internal predispositions to fix the device and make the correct hole.

A = prearrangements for fastening on flat surface

B = prearrangements for angle fastening

C = prearrangements for fastening with 1033/139 bracket
 Nota Bene
For the use of the supplementary bracket Ref.1033/139, refer to its instructions in the box of the bracket
itself.
Press with a screwdriver to open
the cover
C
A
B
Hole for the lens