19
The LiSSI® sensor matte can be purchased via our Web shop (
with
item number LP0020, as a SET together with
with item number
WLP0038, from the specialized resellers or through your pharmacy.
Operating
with several Receivers
Especially when operating the device in hospitals or nursing homes, the need arises
to signal an acoustic alarm at different locations - as in the room of the patient himself
and in the room in which the nursing staff is located.
A
transmitter basically can be operated with an unlimited number of
receivers. A further receiver must only be registered (paired) to the transmitter (see
section “Pairing of the Transmitter to the Receiver“,
page 14). All receivers paired
with the transmitter give an acoustic signal in the event of an alarm simultaneously.
The alarm sounds however, have to be switched off individually for each receiver
(see section "Stopping the Alarm", page 17)
For answers to frequently asked questions and advice on the treatment of enuresis,
please refer to the enclosed brochure
"Bedwetting
– latest information for a common
problem.
Summary of the Receiver displays (fig. 5)
a)
LED display for the Transmitter’s operating mode
•
Only the orange coloured LED (drop symbol) lights up: The alarm is
triggered, the sensor is wet
•
Only red LED (battery icon) flashing: The battery in the Transmitter is
weak and must be replaced.
•
Both LEDs are lit: The device is in pairing mode
b)
LED display for the operating mode of the Receiver
•
Both LEDs off, no display: Device is running on battery and batteries have
sufficient charge.
•
Red LED flashes: The Receiver batteries have to be replaced
•
Green LED: Device running on power supply
Important note:
The functions described only appear if there are batteries in
the Receiver and/or the Receiver is operating through the power supply.
