7
Total Control
HDA-1600-70V
Owner’s Manual
Rear Panel Description
Below are the available connections on the rear of the HDA-1600-70V:
1. AC Main Power:
Connect the
supplied power cable
here to provide the
device with power.
2. LAN:
Full Duplex Gigabit LAN ONLY, for audio streaming and zone control
(Wi-Fi NOT supported, device must be hard-lined to the network).
3. Audio Inputs:
Each input is converted to an
HDA Audio Stream
on the local
network and
accessible by any HDA controlled zone
:
•
Analog -
Four (4) unbalanced RCA style stereo inputs
•
Balanced Audio Inputs:
Using the
supplied XLR to terminal block
input adapter
, these inputs can be configured as such:
■
One Balanced Stereo
line-level Analog Input.
■
Two Balanced microphone level inputs
with Phantom Power.
4. Preamplifier Output:
Two (2) fixed preamplifier outputs with 12V
programmable triggers capable of 150 mA of current.
5. Speaker Output:
Supports a
single stereo zone
or
two
(2) independent
mono zones
.
Slotted-styled
screws are
used to secure the speaker wire
to the terminal block/phoenix
style connector.
1
2
3
4
5
