4
Total Control 2.0
HDA-8100
Owner’s Manual
4
Total Control
HDA-8100
Owner’s Manual
3. Ethernet LED:
Indicates one (1) of the following:
•
Solid Blue:
The device has received an IP address from the local network.
•
Blinking Blue:
The device is connected to the local network; however, it
has not received an IP address.
•
Off:
The device is not connected to the local network.
4. Reset Button:
There are two (2) ways to press this button:
•
Single Press:
Tap the Reset button to power cycle the device.
•
Factory Reset:
Press-n-hold the Reset button for 10 seconds or more.
This option cannot be reversed, once the device has been factory defaulted
it
requires re-programming
.
3
4
